Hydraulic rubber hose SAE 100 R7
SAE100 R7 thermoplastic hydraulic hose is suitable for delivering synthetic, petroleum or water-based hydraulic fluids in the working temperature of -40 °C to +100 °C. It is non-conductive due to its appropriate materials. It is composed of three parts: tube, reinforcement and cover. The tube is made from high quality oil resistant thermoplastic, making the hose widely used in delivering synthetic, petroleum or water-based hydraulic fluids. The reinforcement is made from suitable synthetic fiber and the cover is made from high quality thermoplastic, which is resistant to weather and hydraulic fluids.Specifically, it can be divided into the following three types.
Fiber Braid(Nonmetallic) Resin Hose
INNER TUBE: Oil resistant seamless thermoplastic Polyamide (PA) tube.
REINFORCEMENT: one or two layer braided high tensile synthetic fibre.
COVER: Black high abrasion resistant polyurethane.
SAE100 R7 Thermoplastic Hydraulic Hose APPLICATION: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) hose.
SAE100 R7 Thermoplastic Hydraulic Hose TEMPERATURE RANGE: -40℃ (-104 ℉ ) to +100℃(+212 ℉)
Steel Wire Braid Resin Hose
INNER TUBE: Oil resistant seamless thermoplastic Polyamide (PA) tube.
REINFORCEMENT: one or two layer braided high tensile steel wire.
COVER: Black high abrasion resistant polyurethane.
SAE100 R7 Thermoplastic Hydraulic Hose APPLICATION: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) hose.
SAE100 R7 Thermoplastic Hydraulic Hose TEMPERATURE RANGE: -40℃ (-104 ℉ ) to 100℃(+212 ℉)
Fibre Or Wire Braid Resin Twin Hoe
INNER TUBE: Oil resistant seamless thermoplastic Polyamide (PA) tube.
REINFORCEMENT: one or two layer braided high tensile synthetic fibre.
COVER: Black high abrasion resistant polyurethane.
SAE100 R7 Thermoplastic Hydraulic Hose APPLICATION: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) hose.
SAE100 R7 Thermoplastic Hydraulic Hose TEMPERATURE RANGE: -40℃ (-104 ℉ ) to +100℃(+212 ℉)
Raw Material:
Our hydraulic hose SAE 100 R7 produced by Nylon materials imported from Japan.
With the imported materials ,our hose get more stronger heat & temperature resistant character.and high tensile strengthThe temperature range from -40℃ to 120℃ .
Factory Workshop:
Our factory introduce advanced technology and equipment to make the bets quality hydraulic hose.
High speed braiding machine braid the reinforcement layer more steady.
Laboratory:
Our factory has strong quality control team, we set up advanced laboratory.
Before the mass production, we test each batch of raw material.
After the production, we test each hose to guarantee a 100% qualification.
Each hose tested at 2 times of working pressure.
We do everything possible to supply good quality goods for our customer.
After finishing the Hydraulic rubber hose SAE 100 R7 production, we will pack the hose. In general, the packing will
use woven bag and plastic film. Special packing is available according to customers’ requirements.
Market: Our product has exported to over 30 countries, including the United States, Britain, Brazil, Russia and so on and we participate in overseas exhibitions every year.
Exports:
1). ADVANCED PRODUCTION EQUIPMENT
2). ISO 14000 / ISO 9000 / QUALITY CERTIFICATE
3). STRICT QUALITY CONTROL, STRONG R&D TEAM
4). ENVIRONMENTAL FRIENDLY WITHOUT POLLUTION
5). 10 YEARS MANUFACTURING EXPERIENCE, STRONG TEAM